After about three months in which we went through various feelings of delight, upset, happiness, disappointment, three months of unpredictable problems, solutions, improvisations, and many things learned, we managed to

Building frames out of very thin profiles requires a secure reinforcement of the corners because the gluing surface is very small. We had to fix this problem in a previous

When making MDF furniture, we want the joints at the corners to be as strong and stable as possible. Here are three methods we use: for the furniture boxes with

We have reached the step of rounding the inner corners of our MDF nightstand boxes. Usually, the inner corners are not fully visible if the furniture has drawers installed. It

One of the most frequent questions we’ve received about the design of these mid-century MDF nightstands is: “How did you make the curved edges?” That was also our first question

We talked in a previous post about how we make an MDF nightstand and about the solution we found to make possible the rounding of the inner and the outer

We love to combine drawer fronts made out of natural oak wood with MDF furniture (and most of all when it is painted white). The combination of white paint and

After a lot of wooden furniture projects I decided to take a break, so I played a few hours in the workshop, building a set of decorative wooden knives. With

I needed an adjustable workbench light that I would be able to hang off the roof of the shop. I also wanted to be able to attach it to the

In this post I have presented a method of joining MDF boards, edge to edge. This method is very useful for DIY projects that require custom shapes of MDF boards. For low material loss, sometimes it is better to join smaller MDF boards than to cut the shape out of a large sheet. Learn more about this type of MDF joint in this post